FAQ

We recommend using a medium-cut pad. In our range, this could be the dedicated ADBL Roller Pad One Step.

The solution can be prepared depending on the stubbornness of the dirt. Standard proportions, which easily handle most contaminants, are 1 to 10, meaning 100 ml of the product + 900 ml of water. In the case of heavier dirt, prepare the solution in a ratio of 1 to 4, meaning 250 ml of the product + 750 ml of water.

The ADBL Hard Cut, ADBL Super Polish, and ADBL Perfect Finish compounds are exclusively water-based and do not contain fillers. The All In One compounds such as ADBL AIO Hard and ADBL AIO Soft include waxes and synthetic polymers in their formula.

There is no straightforward answer to this question. For a multi-stage correction, it is necessary to prepare cutting pads with strong cutting force, medium-cutting, as well as finishing pads. The choice of pads depends on the extent of paint damage and its type.

ADBL Rimtector is effective when it comes into contact with water, so applying it to a wet wheel is essential and completely safe. Remember to rinse the product off with water.

In the case of solvent-based products, the product mass will always be lower than the volume in liters.

For paint decontamination, ADBL Vampire Liquid is the most effective choice. Thanks to its lightweight consistency, it can be easily sprayed using an atomizer or sprayer, ensuring high efficiency. In comparison to the regular ADBL Vampire, it has a significantly shorter reaction time and can be rinsed off even after 5 minutes. It can also be used for wheels, but if there is a high level of metallic contaminants on the wheels, I would recommend ADBL Vampir. For everyday wheel cleaning, ADBL Vampire Light is recommended.

Products from the ADBL Leather Kit are suitable for any color of natural leather and eco-leather.

ADBL Beetle Juice Squeezer is safe for waxes when used in the appropriate manner. It should be sprayed onto a cool and contaminated surface, left for the recommended time, and then rinsed off. This way, you won’t damage applied waxes or sealants. It’s crucial not to introduce mechanical elements such as friction, sponge, glove, or microfiber during the process.

The new ADBL Tar Remover Thixotropic offers high effectiveness and increased efficiency due to its thixotropic liquid structure, which temporarily increases its viscosity and ‘sets’ on the surface after application with a spray. It is more potent in action while still safe for surfaces, and for heavy soiling, it can be left on for several hours.

Yes, the ADBL Tar and Glue Remover is being discontinued and will be replaced by the ADBL Tar Remover Thixotropic.

The solution can be prepared depending on the stubbornness of the dirt. Standard proportions, which easily handle most contaminants, are 1 to 10, meaning 100 ml of the product + 900 ml of water. In the case of heavier dirt, prepare the solution in a ratio of 1 to 4, meaning 250 ml of the product + 750 ml of water.

The dilution of ADBL IPA varies depending on the specific needs and is closely related to the surface on which we want to use it.

• Soft paint – 30% to 50%
• Degreasing windows – 50% to 100%
• Removing resin from coniferous trees – 100%

We recommend diluting ADBL IPA with demineralized water as it does not contain any impurities, is not chlorinated, etc. When diluted with regular water, slight streaks may or may not appear after use.

We recommend ADBL Tangy, a slightly acidic pH shampoo.

ADBL Yeti does not impact the lifespan of coatings in any way. Nevertheless, when maintaining cars with applied ceramic coatings, we recommend using active foams with an acidic pH, such as ADBL Acid Cherry Foam from the Industrial line.

ADBL Tar Pro is a highly aggressive tar remover designed for targeted applications. Therefore, we strongly advise against using it on a ceramic coating. However, we can recommend our product ADBL Tar and Glue Remover, which, thanks to the use of natural solvents, is much safer for protected surfaces.

ADBL Acid Cherry Foam is a foam with a slightly acidic pH. When used according to the instructions, it is completely safe for waxes, sealants, and ceramic coatings.

ADBL Beetle Juice Squeezer is safe for waxes when used in the appropriate manner. It should be sprayed onto a cool and contaminated surface, left for the recommended time, and then rinsed off. This way, you won’t damage applied waxes or sealants. It’s crucial not to introduce mechanical elements such as friction, sponge, glove, or microfiber during the process.

Using the appropriate active foam will not remove ADBL Quick Wax from the paint surface; in fact, it will help soften dirt adhered to the car. In your case, I would recommend using a neutral pH foam, such as ADBL Yeti or ADBL Yeti Pearl, which are not aggressive towards this product. After using the active foam, it is advisable to hand wash and dry the vehicle. If the product continues to work during washing, there is no need to reapply it after each wash, but it also wouldn’t be a mistake to do so.

ADBL Yeti foam is a neutral product, so it is safe for waxes, sealants, invisible wipers, films, or ceramic coatings.

In the case of body care chemicals such as shampoos, active foams, and protectants, there are no issues with using them on a car wrapped in film. Caution should be exercised with solvent-based products such as ADBL Tar Pro, ADBL Wipe Out Pro, ADBL Tar and Glue Remover, and highly alkaline solutions like ADBL APC Pro and ADBL Green’gine.

Yes, they are safe, and the usage is the same.

It is necessary to thoroughly rinse the product before clay barring because ADBL Tar and Glue Remover is solvent-based, which can damage the clay bar.

It is best to rinse off the product from the paint surface after application and wiping.

The pH of ADBL Vampire Liquid is 6 – 7, and the pH of ADBL Vampire Light is 6.5 – 7.5.

In every case of such dirt, we recommend ADBL Vampire products – depending on the severity of the contamination, either ADBL Vampire or ADBL Vampire Liquid. However, in some cases, if the dirt is baked in, paint correction may be necessary.

Our Tar and Glue Remover can certainly be used on matte paints. If it is non-original paint, please perform a test in an inconspicuous area.

For paint decontamination, ADBL Vampire Liquid is the most effective choice. Thanks to its lightweight consistency, it can be easily sprayed using an atomizer or sprayer, ensuring high efficiency.

In comparison to the regular ADBL Vampire, it has a significantly shorter reaction time and can be rinsed off even after 5 minutes. It can also be used for wheels, but if there is a high level of metallic contaminants on the wheels, I would recommend ADBL Vampir. For everyday wheel cleaning, ADBL Vampire Light is recommended.

ADBL Vampire Light is primarily dedicated to the daily care of wheels, while ADBL Vampire Liquid, due to its increased adhesive power, is particularly recommended for paint decontamination.

ADBL Tar and Glue Remover can be used on windows, but please be cautious with the seals and wiper blades, as these components are sensitive to the effects of solvents.

All our bleeding products, ADBL Vampire, ADBL Vampire Light, and ADBL Vampire Liquid, have a neutral pH and are safe for cleaned surfaces. It is essential to remember the proper application rules, which include applying the product to cooled elements.

One should rinse the product generously until the white traces are no longer visible.

ADBL Synthetic Spray Wax offers slightly longer durability and more noticeable darkening. ADBL Speed QD is primarily designed for quick protection after each wash; it’s much easier to buff off and faster to use. It leaves a glossy finish on the paint without significant darkening.

ADBL Ceramic QD is designed for use on ceramic coatings as a boosting and protective agent. If applied to a surface coated with wax, it won’t cause any harm; it will provide some protection for the paint, but it won’t exhibit exceptionally strong visual effects, and water beading may not be as prominent.

No, none of our products—ADBL QD1, ADBL Synthetic Spray Wax, ADBL Speed QD—contain UV filters. The only products with UV filters are ADBL Matt Max and ADBL Interior WOW.

The best choice for applying ADBL Wax One would be one of our applicators, such as ADBL Soft Pad. Before applying the wax, please remember to properly prepare the car for paint protection – we recommend performing a thorough wash with decontamination.

ADBL QD1 can be used between washes for a gentle paint refresh. However, for application on a ceramic-coated surface, ADBL Ceramic QD is highly recommended – a product specifically designed for this purpose.

For liquid waxes, we recommend buffing using the ADBL Mr. Gray or ADBL Pinky microfiber applicator pads (lint-free microfiber applicators sold in packs of 10).

Absolutely. The product is safe and can be used on both film and ceramic coatings.

Certainly, you can apply QD1 on a hard wax. This will enhance the effect and extend the lifespan of the wax itself.

ADBL Wax One lasts on the paint surface for up to 3 months.

In the case of solvent-based products, the product mass will always be lower than the volume in liters.

Certainly, you can use ADBL Tire and Rubber Cleaner to clean rubber components on a bicycle.

ADBL Tire Dressing is applied to a dry tire using an applicator, resulting in darkening and a wet-look effect. ADBL Black Water can be applied to a wet tire, providing a strong darkening effect. It can also be used on other rubber and plastic elements.

Regarding durability, it largely depends on how well the tire was prepared for the dressing—lasting from several weeks to 2-3 months.

Due to its compact, gel-like consistency, the product stays on the rim longer, unlike the old ADBL Wheel Warrior. The formula has been enriched with corrosion inhibitors. Easy application control – the rim coverage is visible due to the color of the liquid. In addition, it has a much milder odor.

Yes, the ADBL Wheel Warrior is being discontinued and will be replaced by the ADBL Wheel Warrior Gel.

ADBL Rimtector is characterized by high adhesion and fast application. It is resistant to temperature and uses a polymer specifically designed to withstand high temperatures.

The effect lasts for several weeks with proper application on a well-cleaned wheel. This depends on various factors, such as the paint on the wheel and weather conditions. It can be reapplied after each wash.

It is safe to use on steel and painted wheels, but we certainly do not recommend using it on polished aluminum wheels – the surface is likely to oxidize, and it will become ‘dull.

No highly alkaline product, such as ADBL APC, will be safe for ‘bare’ aluminum. Potential damage, oxidation, etc., may not occur in the case of every wheel due to various production processes and alloy components. However, the risk is always significant, and if any undesired reactions occur, traces will be the only way to remove them, requiring polishing.

ADBL Rimtector is effective when it comes into contact with water, so applying it to a wet wheel is essential and completely safe. Remember to rinse the product off with water.

We recommend using ADBL Rimtector always on a wet wheel. In case the product dries, it will be necessary to use ADBL APC in combination with a brush. If this proves to be insufficient, the next step will be polishing.

All our bleeding products, ADBL Vampire, ADBL Vampire Light, and ADBL Vampire Liquid, have a neutral pH and are safe for cleaned surfaces. It is essential to remember the proper application rules, which include applying the product to cooled elements.

You can use ADBL Glass Cleaner2 for tinted windows.

We recommend using this product for external windows due to the invisible wiper effect. It is advisable to use it only on the external side of the window.

The best option would be to use ADBL Glass Polish.

ADBL Glass Polish can be used both wet and dry – rinsing poses no problem.

Apply the product to the felt side of the ADBL Glass Cube applicator and, using crosswise movements (first lengthwise, then crosswise), work it on glass surfaces, preferably previously cleaned and rinsed from loose dirt. After finishing the job, rinse or wipe with ADBL Glass Cleaner2, depending on the chosen method.

The main difference between ADBL Glass Cleaner and ADBL Glass PRO is that the former is designed for regular cleaning, while the PRO version is intended for heavier contamination such as mineral and organic pollutants like water spots, bird droppings, nicotine film, etc. Additionally, the PRO version evaporates rapidly, even in challenging conditions like high humidity and low temperatures.

As for the difference between ADBL Glass Cleaner and ADBL Glass Cleaner2, it’s worth noting that the second version is part of the Holawesome series and was initially intended to replace the basic version of Glass Cleaner. It has improved cleaning and degreasing properties.

ADBL Hybrid Glass is a liquid for regular cleaning of glass surfaces, leaving behind an invisible wiper effect (hydrophobic). Therefore, if this effect is undesirable, we recommend using Glass Cleaner 2 (Holawesome Line).

The product can be removed using ADBL Glass Polish.

ADBL Tar and Glue Remover can be used on windows, but please be cautious with the seals and wiper blades, as these components are sensitive to the effects of solvents.

It is advisable to start working at a low speed, spreading the compound on the panel, and then increase to the target RPM at gears 3-4.

The noise level of the D09125-01 machine is 80-82 dB at maximum speed. This is not just a specification value but has been measured in real conditions during regular machine operation.

The new ADBL Roller D09125-02 machine features a more powerful motor compared to the older 9 mm machine. It includes a brush wear indicator, and its ergonomic design allows for a perfect fit in the hand, increasing comfort. Additionally, it offers stabilised rotations, resulting in significantly reduced vibrations. Now, it is also considerably lighter, making extended work on the car much easier.

The ADBL AIO Hard (All in One) paste is a product that, in addition to polishing, cleans and protects the paint in a single step.

For manual work with ADBL AIO Soft, we recommend using a sponge ‘Finish’ pad/applicator. This can be, for example, the ADBL Soft Pad or the black polishing pad ADBL Roller.

Only four small pea-sized dots are sufficient for a 40×40 cm panel.

The ADBL Hard Cut, ADBL Super Polish, and ADBL Perfect Finish compounds are exclusively water-based and do not contain fillers. The All In One compounds such as ADBL AIO Hard and ADBL AIO Soft include waxes and synthetic polymers in their formula.

ADBL Hard Cut is a compound with strong cutting power, and its main purpose is to remove as many scratches as possible. ADBL AIO Hard is a multifunctional All In One compound that, in addition to correction, is also designed for protection. If you want to remove as many scratches as possible, we recommend using ADBL Hard Cut compound.

We recommend using a medium-cut pad. In our range, this could be the dedicated ADBL Roller Pad One Step.

At present, the majority of our pads are closed-cell, with the only exception being the EVO pad.

There is no straightforward answer to this question. For a multi-stage correction, it is necessary to prepare cutting pads with strong cutting force, medium-cutting, as well as finishing pads. The choice of pads depends on the extent of paint damage and its type.

A pad with a hole is designed for Dual Action machines, while a pad without a hole is for rotary machines.

It is safer for the respiratory system and noticeably less suffocating. Additionally, it foams significantly better, allowing for longer usage and reducing consumption. Its richer formula enhances cleaning properties.

Yes, the ADBL APC PRO is being discontinued and will be replaced by the ADBL APC Typhoon, which is even more effective.

The solution can be prepared depending on the stubbornness of the dirt. Standard proportions, which easily handle most contaminants, are 1 to 10, meaning 100 ml of the product + 900 ml of water. In the case of heavier dirt, prepare the solution in a ratio of 1 to 4, meaning 250 ml of the product + 750 ml of water.

Detailing Swabs are made of plastic sticks with foam tips and are designed for multiple uses. After use, you can simply rinse them, for example, in water with a shampoo or another detergent.

Yes, it can be used on any leather upholstery, leaving a natural matte finish.

No, it restores a matte, natural look to the leather while providing protection.

Products from the ADBL Leather Kit are suitable for any color of natural leather and eco-leather.

For suede surfaces, the safest choice would be ADBL Bonnet. It is neutral, and you can leave it to evaporate without the need to rinse it from the material. Do not oversaturate the suede.

Correct, ADBL Leather Kit is designed for cleaning and impregnating smooth leather, so it should not be used on materials such as alcantara, suede, or nubuck.

Yes, if the eco-leather and the instrument cluster cover, provided they don’t have an anti-reflective coating, are made of plastic, you can safely clean them with ADBL Interior Cleaner.

ADBL Defoamer should be added to the waste water tank of the carpet cleaning vacuum to eliminate the foaming of the cleaning solution.

ADBL Bonnet is a product designed for non-extraction cleaning of fabric elements that should not be soaked (such as headliners, fabric armrests, and door panels).

ADBL Textile Rinse has a pH of 7, making it neutral.

Yes, ADBL Bonnet would be the best choice. Firstly, it is a neutral product that does not require rinsing, and it is sufficient to leave the cleaned element to dry. We recommend using it especially with ADBL Goofer.

ADBL Bonnet is designed for non-extractive cleaning of fabric surfaces that are not suitable for saturation (headliner, door panels, armrest). The product itself does not leave streaks and completely evaporates from the fabric surface. However, when used on heavily soiled surfaces with dirt deeply embedded in the fabric structure, it must be rinsed with an extraction vacuum cleaner. Without rinsing, the product only moves the dirt with the brush rather than removing it. For heavy soiling, it is recommended to rinse the dirt, and as an additional step in this process, the use of ADBL Textile Rinse is recommended.

Yes, for washing seats, you can apply a small amount of the product to the surface. Then, use a brush to scrub the area, and finally, wipe the element with a clean microfiber cloth.

It is safer for the respiratory system and noticeably less suffocating. Additionally, it foams significantly better, allowing for longer usage and reducing consumption. Its richer formula enhances cleaning properties.

Yes, the ADBL APC PRO is being discontinued and will be replaced by the ADBL APC Typhoon, which is even more effective.

ADBL Interior QD is a gentle enough product that it certainly won’t cause any damage to these elements on its own.

The best option would be to use ADBL Glass Polish.

ADBL Interior QD is definitely a better choice, or for cleaning such elements with fingerprints and light dirt, ADBL Glass Cleaner2 will perform well. We recommend using ADBL Chick, an ultra-soft microfiber, for cleaning because Piano Black is susceptible to scratches.